Mbụ Fujitsu FTP-638MCL401 Thermal Printer Mechanism
Usoro FTP-638 MCL bụ ndị na-ebi akwụkwọ na-agba ọsọ 5V nwere onye na-egbutu akpaaka dị ala na ogologo ndụ.
Enwere ike iji usoro FTP-638 MCL maka ngwa dị iche iche, dị ka ọnụ ahịa POS, ọnụ ụlọ akụ, na nha na akụrụngwa ahụike.
• Profaịlụ dị ala dị ala
Ogologo 21.8 mm, obosara 103.2 mm, omimi 42.2 mm
• Mbipụta ọsọ dị elu
Ọ nwere ike ibipụta na 60 mm/s (480 dotline/s) kacha site na iji njikwa mbanye isi pụrụ iche nke Fujitsu.
• Cutter akpaaka
Ogologo ndụ na guilotine dị elu nwere moto raara onwe ya nye.
• Mpempe akwụkwọ dị mfe
Usoro ntọhapụ platen anyị na-enye ohere ụzọ akwụkwọ sara mbara, yabụ enwere ike itinye akwụkwọ n'ụzọ dị mfe.
• Igwe ihe nkedo na-arụ ọtụtụ ọrụ
Oke okpomọkụ na-arụ ọrụ obosara, mbipụta na-aga n'ihu na-adịte aka, nnabata ESD dị elu na mwepu nke ịma jijiji eletrik static na ujo na-eguzogide.
• RoHS kwadoro
• Akwụkwọ ndekọ ego
• EFT POS ọnụ
• Nfuli gas
• ọdụ ụgbọ ala
• Akụrụngwa na nyocha
• mita tagzi
| Ihe | Nkọwapụta | |
| Nọmba akụkụ | FTP-638MCL401 | |
| Usoro obibi akwụkwọ | Usoro ntụpọ ọkụ ọkụ | |
| Ọdịdị ntụpọ | 576 ntụpọ/akara | |
| Ntụpọ ntụpọ (nke kwụ ọtọ) | 0.125 mm (ntụpọ 8/mm) — njupụta ntụpọ | |
| Ntụpọ ntụpọ (nke kwụ ọtọ) | 0.125 mm (ntụpọ 8/mm) —Pịpị ndepụta ahịrị | |
| Ebe obibi akwụkwọ dị irè | 72 mm | |
| Ọnụọgụ nke ogidi | Ogidi/ahịrị ANK 48 (ọkara ntụpọ 12 x 24) | |
| obosara akwụkwọ | 80 mm | |
| Mpempe akwụkwọ | 60 ruo 100 pm (ụfọdụ akwụkwọ dị na nso a enweghị ike iji ya n'ihi njirimara akwụkwọ) | |
| Ọsọ mbipụta | Kachasị 60mm / sk.(akara ntụpọ 480/sk.) na 8.5V | |
| Ụdị agwa | Alphanumeric, kana: 159 ụdị mkpụrụedemede mba ụwa: ụdị 195 JIS Kanji (Kanji CG loaded board): ihe dị ka ụdị 6800 | |
| Àgwà, akụkụ (WxH), ọnụọgụ ogidi | 12 x 24 ntụpọ, (1.5 x 3.0 mm), kọlụm 48: ANK 24 x 24 ntụpọ, (3.0 x 3.0 mm), kọlụm 24: ANK 8 × 16 ntụpọ, (10 x 2.0 mm), kọlụm 72: ANK 16× 16 ntụpọ, (2.0 x 2.0 mm), ogidi 36: ANK | |
| Interface | Dabara na RS232C/Centronics | |
| Ịnye ọkụ | Maka isi mbipụta | 4.2 - 8.5 VDC nkezi ugbu a, 0.30A (2.4A kacha elu) na 7.2V (oke mbipụta: 12.5%, ọsọ mbipụta: 60mm/sk.) |
| Maka moto | 4.2 - 8.5 VDC ± 5%, 1.0A kacha | |
| Maka cutter | 7.2 - 8.5 VDC ± 5%, 1.1A kacha | |
| Maka mgbagha | 3.0 -5.25 VDC, 0.1 kacha | |
| Akụkụ | Mechanism na cutter | 103.2 x 42.2 x 21.8 mm (WxDxH) |
| bọọdụ interface | 70 x 60 x 12mm | |
| Ibu | Mechanism na cutter | Ihe dịka 118g |
| bọọdụ interface | Ihe dị ka 25g | |
| Ndụ | Isi | Nkwụsi ike nke ụda: 100 nde pulses / ntụpọ (n'okpuru ọnọdụ ọkọlọtọ anyị);Abrasion eguzogide: akwụkwọ njem anya 50km (mbipụta mbipụta: 12.5% ma ọ bụ obere) |
| Cutter | Mbelata 500,000 (mbelata 20 / nkeji) | |
| gburugburu ebe ọrụ | Ọnọdụ okpomọkụ na-arụ ọrụ* | 0°C ruo 50°C |
| iru mmiri na-arụ ọrụ | 20 ruo 85% RH (enweghị condensation) | |
| Ọnọdụ nchekwa | -20°C ruo +60°C (a naghị etinye akwụkwọ) | |
| iru mmiri nchekwa | 5 ruo 90% RH (enweghị condensation) | |
| Ọrụ nchọpụta | Nchọpụta okpomọkụ isi | Thermistor achọpụtara ya |
| Nchọpụta akwụkwọ/akara akara | Achọpụtara ya site na onye na-egbochi foto | |
| Mwepụta Platen | Achọpụtara ya site na mgba ọkụ na-amị amị | |
| Akwụkwọ na-enwe mmetụta ọkụ akwadoro | Akwụkwọ nwere mmetụta dị elu TF50KS-E4 (Akwụkwọ Nippon) | |
| Akwụkwọ ọkọlọtọ: TF60KS-E (Akwụkwọ Nippon), FTP- 020PU001 (58mm), PD105R (Oji Akwụkwọ), FTP-020P0701 (58mm) | ||
| Akwụkwọ Ndụ Ọkara TF60KS-F1, FTP-020P0102 (58mm), PD170R (Oji Akwụkwọ), P220VBB-1 Mitsubishi Akwụkwọ) | ||
| Akwụkwọ ndụ ogologo ndụ PD160R-N (Akwụkwọ Oji), AFB-235 (Akwụkwọ Mitsubishi), TP50KJ-R (Akwụkwọ Nippon), HA220AA (Akwụkwọ Nippon) | ||