58mm 2 inch Thermal Printer Head Mechanism JX-2R-10SL Dakọtara APS SS205
♦ Mpempe akwụkwọ dị mfe
♦ Obere nha, obere arọ
♦ Metal frame, metal gear shaft, kwụsiri ike, a pụrụ ịdabere na ya, ndụ dị elu, ezigbo ihe ọkụkụ
♦ Bipụta ọsọ (max): 85 mm / s (na 9.5 V voltaji nke moto)
♦ Igwe ọkụ na-arụ ọrụ obosara (3.5 V-9.5V)
♦ Oke izi ezi (ntụpọ 8 / mm)
♦ Yiri ndụ: karịa 50 km
♦ Ọ dịghị mkpa ka mmezi
♦ Obere mkpọtụ: brushless magnetik mkpali nzọụkwụ moto;elu eyi na-eguzogide, mejupụtara eguzogide elu / ala okpomọkụ pụrụ iche engineering plastics gia, na-eme ka ọ nwere nnọọ ala mkpọtụ.
♦ Dakọtara na ngwa nbipute thermal APS SS205-V3-HS
♦ Mpempe akwụkwọ / ọdụ ụgbọ ala
♦ EFT
♦ Akwụkwọ ndekọ ego
♦ POS
♦ Igwe arọ
♦ Ngwa ahụike
| Ihe | Nkọwapụta |
| Ụzọ mbipụta | Mbipụta akara ntụpọ thermal |
| Obosara mbipụta (mm) | 48 |
| Nkenke (ntụpọ/mm) | 8 |
| Ntụpọ kwa ahịrị | 384 ntụpọ/akara |
| obosara akwụkwọ (mm) | 58 |
| Ntụpọ ntụpọ (mm) | 0.125 |
| Nha ntụpọ | 0.125mmx0.12mm |
| Ọsọ ebipụta kacha | 85mm / s (moto ịnya ụgbọ ala voltaji bụ 9.5 V.) |
| izi ezi nri | 0.0625mm (2-2 usoro mkpali moto) |
| Nchọpụta okpomọkụ isi | Site na Thermistor |
| Isi Thermal na Ebe/Nchọpụta akwụkwọ | Site foto nkwụsịtụ |
| Voltage ịnya ụgbọ ala (DCV) | 3.13-9.5 |
| voltaji mgbagha isi (DCV) | 2.7-5.25 |
| Voltage ịnya ụgbọ ala (DCV) | 3.5-9.5 |
| Okpomọkụ arụ ọrụ | +0 ℃ ~ 50℃ (Ọ dịghị condensation) |
| iru mmiri arụ ọrụ | 20% ~ 85% RH (enweghị condensation) |
| Ọnọdụ nchekwa | -20℃ ~ 60℃ (Ọ dịghị condensation) |
| iru mmiri nchekwa | 5% ~ 95% RH (enweghị condensation) |
| Mkpọtụ | Ihe na-erughị 60dB(RMS dị arọ) |
| Platen oghe ndụ | Ihe karịrị ugboro 5000 (Roller hapụrụ oge nrụpụta gbakwunyere) |
| Ntugharị na akwụkwọ thermal | ≥50gf |
| Jide ike breeki na akwụkwọ ọkụ | ≥80gf |
| Ogologo ndụ (na 25oC na ike ike) | 100 nde ebipụta pulses ma ọ bụ karịa ndụ obibi akwụkwọ 50km |
| Ibu(g) | 21 |
| Akụkụ (L*W*H) | 67.6±0.5mm*23.2±0.5mm*25.5±0.5mm |