3 inch 80mm JX-3R-01/01RS Thermal Printer Mechanism dakọtara na FTP-638MCL103/101
◆ Mpempe akwụkwọ dị mfe
◆ Obere nha
◆ Metal etiti, metal gia aro, kwụsiri ike, a pụrụ ịdabere na, elu ndụ, magburu onwe okpomọkụ dissipation
◆ Nnukwu ebipụta ọsọ (max): 60mm / s (na 8.5 V moto voltaji)
◆ Wide arụ ọrụ voltaji
◆ Oke izi ezi (ntụpọ 8 / mm)
◆ Ogologo ndụ ogologo oge: karịa 50 km
◆ obere mkpọtụ: brushless magnetik nzọụkwụ moto;elu eyi na-eguzogide, mejupụtara eguzogide elu / ala okpomọkụ pụrụ iche engineering plastics gia, na-eme ka ọ nwere nnọọ ala mkpọtụ.
♦ Mpempe akwụkwọ / ọdụ ụgbọ ala
♦ EFT
♦ Akwụkwọ ndekọ ego
♦ POS
♦ Igwe arọ
♦ Ngwa ahụike
| Ihe | Nkọwapụta |
| Usoro mbipụta | Mbipụta akara ntụpọ thermal |
| Obosara mbipụta (mm) | 72 |
| Mkpebi okpomọkụ (ntụpọ/mm) | 8 |
| Ntụpọ mbipụta nke otu ahịrị | 576 ntụpọ / linej |
| Ogologo akwụkwọ (mm) | 80 |
| ntụpọ ntụpọ (mm) | 0.125 mm |
| Nha ntụpọ | 0.125mm x 0.12mm |
| Ọsọ mbipụta (MAX) | 60mm / s (na 8.5 V moto voltaji) |
| Izi ezi akwụkwọ | 0.0625 mm |
| Nchọpụta okpomọkụ isi okpomọkụ | Site na thermistor |
| Nchọpụta akwụkwọ | Site foto nkwụsịtụ |
| Igwe nbipute isi voltaji na-arụ ọrụ (V) | 4-8,5 |
| voltaji mgbagha (V) | 2.7-5.25 |
| Voltaji moto | 4.2-8.5 |
| Ọnọdụ okpomọkụ na-arụ ọrụ | +0 ℃ ~ 50℃ (enweghị jel) |
| iru mmiri na-arụ ọrụ | 20% ~ 85% RH (enweghị gel) |
| ụlọ ahịa okpomọkụ | -20 ℃ ~ 60℃ (enweghị jel) |
| ụlọ ahịa iru mmiri | 5% ~ 95% RH (enweghị gel) |
| Igwe mkpọtụ | <60dB |
| Platen oghere-emechi oge | > ugboro 5000 |
| Thermal akwụkwọ traction ike | ≥50g |
| Akwụkwọ ọkụ na-ejide ike breeki | ≥80g |
| Ndụ obibi akwụkwọ | >50km |
| Ndụ eletrik | Otu narị nde mkpụrụ akụ (n'okpuru ọnọdụ obibi akwụkwọ ọkọlọtọ anyị.) |
| Mass(g) | Ihe dịka 50g |
| Akụkụ ndepụta (D x W x H) | 92.4mm x 32.9mm x 15.4mm |