58mm Thermal Printer Head Mechanism JX-2R-17 dakọtara na LTP02-245-13
♦ Mpempe akwụkwọ dị mfe
♦ Obere nha, obere arọ
♦ Na-eguzogide okpomoku plastik dị elu, mkpuchi ihe mkpuchi ígwè
♦ Bipụta ọsọ (max): 90 mm / s (na 8.5 V voltaji nke moto, 2-2 frasi mbanye)
♦ Igwe ọkụ na-arụ ọrụ obosara (3.5 V-8.5V)
♦ Oke izi ezi (ntụpọ 8 / mm)
♦ Yiri ndụ: karịa 50 km
♦ Obere mkpọtụ: brushless magnetik mkpali nzọụkwụ moto; elu eyi na-eguzogide, mejupụtara eguzogide elu / ala okpomọkụ pụrụ iche engineering plastics gia, na-eme ka ọ nwere nnọọ ala mkpọtụ.
♦Igwe nbipute/ọnụ ọnụ
♦ EFT
♦ Akwụkwọ ndekọ ego
♦ POS
♦ Igwe arọ
♦ Ngwa ahụike
| Ihe | Nkọwapụta |
| Usoro mbipụta | Mbipụta akara ntụpọ thermal |
| Obosara obibi akwụkwọ dị irè (mm) | 48 |
| Mkpebi ikpo ọkụ (ntụpọ/mm) | 8 |
| Ntụpọ mbipụta nke otu ahịrị | 384 ntụpọ |
| Ogologo akwụkwọ (mm) | 58 |
| Ntụpọ ntụpọ (mm) | 0.125 mm |
| Nha ntụpọ | 0.125mmx 0.12mm |
| Ọsọ mbipụta (MAX) | 90mm / s (na 8.5 voltaji nke moto) |
| Nchọpụta okpomọkụ isi okpomọkụ | Site na thermistor |
| Nchọpụta akwụkwọ | Site foto nkwụsịtụ |
| Voltaji na-arụ ọrụ isi (V) | 3.13-8.5 |
| voltaji mgbagha (V) | 2.7-5.25 |
| Voltaji moto | 3.5-8.5 |
| Ọnọdụ okpomọkụ na-arụ ọrụ | +0C ~ 50C |
| iru mmiri na-arụ ọrụ | 20% ~ 85% RH |
| ụlọ ahịa okpomọkụ | -2O'C'6O'C |
| ụlọ ahịa iru mmiri | 5% ~ 95% RH |
| Igwe mkpọtụ | <60dB |
| Platen na-emeghe oge dose | > ugboro 5000 |
| Thermal akwụkwọ traction ike | 250g |
| Akwụkwọ ọkụ na-ejide ike breeki | 280g |
| Ụjọ ndụ | >50km |
| Ndụ eletrik | Otu narị nde mkpụrụ akụ (n'okpuru ọnọdụ obibi akwụkwọ ọkọlọtọ anyị.) |
| Mass(g) | 30g |
| Akụkụ ndepụta (DxWx H) | 67.2±0.2mm, 18.1±0.2mm *31.8±0.2mm |